Reset To Default Settings - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
To configure DPC:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select SPECIAL. Push the middle of the control stick to
confirm.
3. Move the control stick ↑ / ↓ to select DP COMP. Push the middle of the control stick to
confirm.
4. Select THRESHOLD, then move the control stick ← / → to set the threshold for dead
pixel detection.
5. Select DEFECT DET, then push and hold the middle of the control stick.

3.7 Reset to Default Settings

Resetting the camera to default settings will revert all OSD menu items to their out-of-the-
box state.
CAUTION
Resetting to default settings cannot be reversed.
To reset to default settings:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select RESET.
3. Push and hold the middle of the control stick for 4 seconds to reset the camera to de-
fault settings.
#LX400044; r. 2.0/22410/22410; en-US
19