Shutter; Sens-Up - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
3. Move the control stick ↑ / ↓ to select BRIGHTNESS, then ← / → to configure the bright-
ness level. Setting a higher value makes the camera image brighter.

3.2.2 Shutter

Set the shutter speed of the camera.
To set shutter speed:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select EXPOSURE. Push the middle of the control stick
to confirm.
3. Move the control stick ↑ / ↓ to select SHUTTER, then ← / → to set the shutter mode:
• Select AUTO for the camera to automatically determine the shutter speed based on
lighting conditions.
• Select FLICKER to fix the camera shutter. This reduces color rolling caused by light
flicker.
• Select MANUAL and push the middle of the control stick to set the shutter speed
manually. Under SPEED, select a shutter speed from 1/60 – 1/60000.

3.2.3 Sens-Up

Sens-Up is a slow shutter speed setting that allows more light into the camera to improve
sensitivity in low light conditions. For proper setup, configure this setting while the camera
is viewing low light or nighttime conditions.
To configure Sens-Up:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select EXPOSURE. Push the middle of the control stick
to confirm.
#LX400044; r. 2.0/22410/22410; en-US
10