Exposure; Brightness - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
2. Move the control stick ↑ / ↓ to select LENS, then ← / → to select ELC (Electronic Light
Control) or ALC (Automatic Light Control). It is recommended to use ELC for fixed lens
and manual varifocal camera models, or ALC for motorized lens camera models. Once
you have selected, push the middle of the control stick.
3. Under MODE, move the control stick ← / → set the camera image conditions:
• If you selected ELC, select NORMAL for typical surveillance purposes, or select
DEBLUR to correct a blurry camera image.
• If you selected ALC, select INDOOR for indoor conditions, OUTDOOR for outdoor
conditions, or select DEBLUR to correct a blurry camera image.

3.2 Exposure

Configure settings to determine how much light enters the camera.

3.2.1 Brightness

Set the brightness of the camera image.
To set brightness:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select EXPOSURE. Push the middle of the control stick
to confirm.
#LX400044; r. 2.0/22410/22410; en-US
9