Automatic Gain Control (Agc); White Balance - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
3. Move the control stick ↑ / ↓ to select SENS-UP, then ← / → to set the slow shutter level.
Select a value between X2 and X32 to activate Sens-Up, or select OFF to disable.

3.2.4 Automatic Gain Control (AGC)

AGC is a fixed gain value that affects image brightness under very low light conditions. For
proper setup, configure this setting while the camera is viewing low light or nighttime
conditions.
To configure AGC:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select EXPOSURE. Push the middle of the control stick
to confirm.
3. Move the control stick ↑ / ↓ to select AGC, then ← / → to set an AGC level between 0–
20. Setting a higher value may create more noise in the camera image.

3.3 White Balance

Configure white balance in the camera image.
To configure white balance:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select WHITE BAL.
#LX400044; r. 2.0/22410/22410; en-US
11