Day & Night; Day & Night Mode - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
3. Move the control stick ← / → to set the white balance mode:
• Select AUTO for the camera to adjust white balance automatically.
• Select ATW for the camera to adjust white balance automatically for various color
temperatures.
• Select PRESET to set the white balance based on a white reference object in the
scene, such as a white piece of paper. Push and hold the middle of the control stick
to automatically adjust the white balance. Release the control stick when the white
reference object appears white.
• Select MANUAL and push the middle of the control stick to set the white balance
manually. Set KELVIN to HIGH to increase red-orange tones, LOW to increase blue
tones, or MIDDLE to create a neutral image. Configure R-GAIN and B-GAIN to fine
tune red gain and blue gain respectively.
NOTE
White balance may not work properly under the following conditions. In this case, use the PRESET white
balance setting.
• When the color temperature of the environment surrounding the subject is outside of the supported
temperature range (for example, clear sky or sunset).
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the white balance function may become unstable.
3.4 Day & Night
Set the day and night related settings for the camera.
3.4.1 Day & Night Mode
To set Day & Night mode:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select DAY&NIGHT. Push the middle of the control stick
to confirm.
#LX400044; r. 2.0/22410/22410; en-US
12