Black Level; Privacy Masking - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu

3.6.1 Black Level

Set the black level of the camera image. To set properly, observe a black object in the
camera image and adjust until it appears truly black.
To configure black level:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select SPECIAL. Push the middle of the control stick to
confirm.
3. Move the control stick ↑ / ↓ to select BLACK LEVEL, then move the control stick ← / →
to select FULL, COMP, or USER.
4. If you selected USER, push the middle of the control stick to confirm. Under OFFSET,
move the control stick ← / → to set the black level.

3.6.2 Privacy Masking

Set privacy masks to block specific areas of the camera image from recordings. You can
configure up to 15 different privacy masks per camera.
CAUTION
Privacy masks appear in video recordings and block areas of the camera image.
#LX400044; r. 2.0/22410/22410; en-US
17