SIARR
10 - 74
PREPARATION
* Remove the bumper.
* Drop the exhaust down.
* Remove the trim from the bottom of the boot.
* Cut the 7 lugs from the absorber as per the sketch.
* Make a cut in the bumper as shown in the diagram.
ASSEMBLY
* Inside the boot locate the 2 punch marks - center distance 260mm to the left and
236mm to the right. Drill these holes to a diameter of 17,5mm mark X.
* Position the back plates "4" and "5" using fastening kit and spacers X.
* Fasten the arms "2" and "3" beneath the longitudinal at the points marked X,
whithout tightening.
* Join the tow bar "1" to the points marked V and W with fastening
kits "V" and "W" without tightening.
* Tighten the tow bar arms to the torques indicated below.
FINISHING
* Re-attach the absorber and the bumper.
* Fit the tow bar head "6" using fastening kit Y.
* Replace the interior trim in the bottom of the boot.
FASTENING KIT
4 off HM12x35 screws
V
2 off HM12 nuts
4 off CS12 washers
4 off HM12x35 screws
Y
4 off CS12 washers
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 off HM10x30 screws
2 off HM10 nuts
W
2 off 26-10 plain washers
2 off CS10 washers
4 off HM10x120 screws
4 off HM10 nuts
X
4 off CS10 washers
4 off spacer dia. 12/17 L.87
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM1074-D - FOLIO NDMANG
to suppress 7 lugs
Type
Type
Approval No.
Tow bar for
Vauxhall Opel Astra
e11*94/20*00*1124
Estate 1998 model
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
314334600001
Max. Total
Max. Total
Max. Verti-
Authori. Weight
Towable Weight
cal load
1 865 kg
1 300 kg
Value
D
75 kg
7,51 kN