Orbegozo CV 2650 Manual De Instrucciones página 9

CV 2650
Warning: Position the heater carefully. It must be not in front of or below a power socket. It
must not be below a shelf, curtains or any other obstructions. The heater has to be installed at
least 0.4m above the floor.
Assembly instruction for wall mounting
Hold the heater against the wall in the desired location and check if it is horizontal. Mark the
wall and use these marks to indicate where to drill the holes for the upper left and right
brackets. The distance between the holes is:
Remove the brackets from the heater and prepare to fix them to the wall.
Use the plastic wall plugs to fit to the drilled hole. Then use the screws (long one) to fix the
upper left and right brackets onto the wall.
Use screws (short one) to fix to upper left and right brackets on the bottom of the heater.
9