Orbegozo CV 2650 Manual De Instrucciones página 8

CV 2650
supervised or have received instruction concerning use of the appliance in a safe and
understand the risks that the device has. Children from 3 years and under 8 must not
be plugged regular and clean the appliance or performing maintenance.
- CAUTION: Some parts of this appliance may become hot and cause burns. Care should
be taken particularly where children and vulnerable people are present.
- The appliance should not be located immediately below a socket base.
- Do not use this heater in the immediate surroundings of a bath, shower or pool.
SAFETY INSTRUCTIONS (to be read before operating the heater)
Do not use the heater unless the feet are correctly attached.
Ensure the power supply to the socket into which the heater is plugged is in accordance with
the rating label on the heater and that the socket is earthed.
Keep the mains lead away from the hot body of the heater.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Never place the heater where it may fall into a bathtub or other water container.
Do not use outdoors.
Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
In order to avoid overheating , do not cover the heater
Do not place the heater on carpets having a very deep pile.
Always ensure that the heater is placed on a firm level surface. Ensure that the heater is not
positioned close to curtains or furniture as this could create a fire hazard.
Do not position the heater in front of, or immediately below, a wall socket.
Do not insert any object through the heat outlet or air intake grilles of the heater.
Do not use the heater in areas where flammable liquids are stored or where flammable fumes
may be present.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Always unplug the heater when moving it from one location to another.
ASSEMBLY OF THE HEATER
Fitting the feet: carefully turn the unit upside down. Use 4 screws for feet to fix the 2 feet onto
the heater. Take care to ensure that they are located correctly in the bottom ends of the
heater side mouldings.
WALL MOUNTING (optional)
Screws to enable unit to be mounted onto the wall if required.
Important: when drilling into walls always check that there are no hidden wires of pipes etc.
Make sure that the screws and wall plugs supplied are suitable for supporting the unit. Consult
a qualified person if you are not sure.
8