Operation; Remote Control Operation - Home Decorators Collection 26666 Guía De Uso Y Mantenimiento

Operation

CAUTION: This device complies with part 15 of the FCC rules.
Changes or modifications not expressly approved by the
manufacturer could void your authority to operate this equipment.
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan. For more
information on how to install the remote control, see the remote
control instruction along with the remote control components.
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
NOTE: The reverse switch is located at the top of motor housing.
Shut the fan off then wait until the blades have completely
stopped before flipping the switch to reverse the direction of your
ceiling fan.
Warm weather - (Forward) A downward airflow creates a cooling ef-
fect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of
the ceiling. This allows you to set your heating unit on a cooler set-
ting without affecting your comfort.

Remote Control Operation

a. Load a fresh set of 4 "AAA" 1.5v batteries (included) into the
battery compartment.
b. Fan Auto Button: Use this button to select Auto/Manual
operation of your fan.
Fan speed "MANUAL" mode: Use the gray button to adjust
c.
the speeds by pressing and releasing the button each time
to change speeds from High to Low as follows:
OFF
HIGH
MEDIUM
LOW
Fan speed FAN AUTO mode adjusts the speeds automatically
based on the temperature setting that you select. Follow the
steps below to set the temperature.
□
Press the button to display FAN AUTO on the LCD display.
Use the TEMP./SET/HOUR BUTTONS
desired temperature from 59°F~99°F. The fan will start
automatically on low speed when the room temperature is
equal and up to 4°F over the set temperature. The speeds
will change from low, medium, and high as the temperature
increases or decreases in 4°F increments
Set temperature 72°F Room temperature 71°F off
Set temperature 72°F Room temperature 72°F Low
Set temperature 72°F Room temperature 76°F Med
Set temperature 72°F Room temperature 80°F High
Light Button: This button turns the light on or off.
□
Press and release the button and the light will turn on or off.
LIGHT TIMER and FAN TIMER buttons: Use this button to set the
sleep timer from 0.5 to 24 hr, in one hour increments.
□
Press the LIGHT or FAN TIMER button once, the timer
symbols will be displayed on the LCD display. You have 6
seconds to set the sleep time; if you do not perform any
entries during this time, the light timer display will be
turned off automatically. To re-set it, simply press the button
again.
Use the TEMP. SET/HOUR buttons
time starting from 0.5-24 hours. The light or fan both will be
turned off automatically when the preset Time expires. If the fan
is in the FAN AUTO mode, it will return to MANUAL mode when
the sleep timer expires.
LIGHT- Delay- Pressing this button activates the light delay
function. The light will automatically shut off after 3 minutes.
NOTE: To select Fahrenheit or Celsius temperature: Press the TEMP./
SET/HOUR buttons at the same time until the F or C symbol appears
beside the Temp number.
12
to set the
to set the desired sleep