FujiFilm Instax mini 70 Manual De Instrucciones página 21

Problems
The finished print looks
1 The ambient temperature is
under exposed. (Dark)
2 The picture was taken facing
3 The flash lampface, AE light
4 The background is too bright
5 The flash light did not reach
6 The flash light reflected back
The picture is out of
1 The shooting distance is not
focus.
2 The lens is not clean.
3 Your camera was shaken when
Possible Causes
high (above +40°C/+104°F).
the light.
sensor window or flash sensor
window was covered.
in comparison with the
subject.
the subject.
from a mirror or window glass.
appropriate.
taking the picture.
Solutions
1 Keep camera, film (exposed prints) away from excessive
heat (+40°C/+104°F).
2 Take pictures with the light behind you, or take pictures
using Fill-in Flash Mode.
3 Be careful not to cover the flash lampface, AE light
sensor window, or flash sensor window.
4 Take pictures using Hi-Key Mode.
5 Take pictures closer than 2.7 m from the subject.
6 Take pictures at an angle not facing the mirror or
window glass.
1 Select the shooting mode according to the distance.
2 Please contact a FUJIFILM authorized distributor.
3 Hold your camera firmly and press in the shutter release
button gently. Since the slow shutter is selected when
shooting indoors or dark outdoors, fixing the camera
using a table, tripod, etc. is recommended. When the
camera is not fixed, shoot in the
EN
Fill-in Flash Mode.
21