Specification; General Safety - GMC DB305SMS Manual De Instrucciones

Specification

Voltage:
Input power:
No load speed:
Ingress protection:
Laser - class 2:
Max blade size:
GB
Bore:
Supplied blade:
Mitre table angles:
Bevel cuts:
Straight cut:
0° x 0°:
Mitre cut:
45° (L&R) x 0°:
52° (L&R) x 0°:
Bevel cut:
0° x 45° (R):
0° x 45° (L):
Compound mitre cut:
45° (R) x 45° (R):
52° (R) x 45° (R):
45° (L) x 45° (L):
52° (L) x 45° (L):
Weight:
As part of our ongoing product development, specifications of GMC
products may alter without notice.
Noise and Vibration Data:
Sound Pressure (L ):
PA
Sound Power(L ):
WA
Uncertainty:
Vibration:
Uncertainty:
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary
230-240V~ 50Hz
1800W
5000min
-1
IP20
λ 650nm, power ≤ 1mW
Ø305mm
Ø30mm
Ø305 x Ø30 x 3.2mm x 32T
0° to 52° left & right
0° to 45° left & right
305mm x 95mm
215mm x 95mm
186mm x 95mm
305mm x 42mm
305mm x 52mm
215mm x 42mm
186mm x 42mm
215mm x 52mm
186mm x 52mm
25.72kg
98dB(A)
111dB(A)
3dB(A)
7.14m/s 2
1.5m/s
2
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct
level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.

General Safety

WARNING! When using electric power tools, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and
personal injury including the following safety information. Read all these
instructions before attempting to operate this product and save these
instructions for future use.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children must be supervised to ensure that they do not play
with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Keep work area clear - Cluttered areas and benches invite injuries
2) Consider work area environment
a) Do not expose tools to rain
b) Do not use tools in damp or wet locations
c) Keep work area well lit
d) Do not use tools in the presence of flammable liquids or gases
3) Guard against electric shock - Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators, ranges, refrigerators)
4) Keep other persons away - Do not let persons, especially children,
not involved in the work touch the tool or the extension cord and keep
them away from the work area
6