Specification - GMC MS018 Manual De Usuario

Specification

Voltage:
Power input:
GB
No load speed:
Blade dia:
Bore:
Supplied blade:
Parallel rip cut:
Max crosscut:
Max depth of cut:
Cutting capacity:
Mitre cut:
Net weight:
As part of our ongoing product development, specifications of GMC
products may alter without notice.
Sound & vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary
EU: 220 – 240V~ 50Hz
SA: 220 – 240V~ 50Hz
AU: 220 – 240V~ 50Hz
USA: 120V~ 60Hz
EU: 860W
SA: 860W
AU: 860W
USA: 7A
9,500min
-1
127mm / 5"
Ø17mm / / "
43
64
ø 127mm (5") x ø 17mm ( ⁄ ")
43
64
Bore x 2.2mm Kerf x 14 Teeth
0 – 108mm / 0 – 4- / "
1
4
460mm / 18- / "
7
64
18mm / / "
45
64
52mm at 90°, 30mm at 45°
2- / " at 90°, 1- / " at 45°
3 3
64 16
±10° micro, 15˚, 20˚,30˚, 45˚
6.8kg / 15lb
95dB(A)
108dB(A)
3dB(A)
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect.
Bench mounted and other non-handheld power tools limit user exposure to
vibration but it is still important to be aware of vibration levels and stop operating
the tool if the vibration level causes discomfort. Take regular breaks when
operating the tool.
Sound and vibration levels in the specification are determined according to
EN 61029 or similar international standards. The figures represent normal
use for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.
6