Troubleshooting - Urrea RB1120 Manual Del Usuario

4. Tap the hex key sharply with a mallet in
a counterclockwise direction. This will loosen
the chuck for easy removal.
5. Attach a new chuck to the spindle and tighten
the chuck screw.

TROUBLESHOOTING

PROBLEM
The hammer
The battery is de-
drill does not
pleted.
work.
The sleeve is not
released.
The bit
cannot be
installed.
The bit does not fit the
sleeve.
CAUSE SOLUTION
Charge the
battery.
Release the
sleeve.
Use a suita-
ble bit.
E N G L I S H •
U s er 's M an u al
17