Safety Information; Proper Installation And Placement - Franke CRYSTAL FH CR 301 1TC Manual Del Usuario

FH CR 301 1TC / FH CR 302 2G / FH CR 604 4G /
FH CR 755 4G TC / FH CR 905 4G TC / FH CR 1204 3G TC

SAFETY INFORMATION

Z X
Read the operating instructions before using
the appliance for the first time.
The manufacturer can not be made liable for
possible damage which may occur due to
incorrect installation and incorrect, improper
or unreasonable use of the device.
To ensure safe and efficient operation of this
electrical device:
Z X
Only contact authorised service centres.
Z X
Do not modify any features of the device.
This appliance is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
This device is not a toy.
Z X
Keep children away from the device and the
packaging material.
Z X
Do not leave children near the device
unattended.
Z X
Do not let children play with the device.
Z X
Do not allow children to touch the device
or its controls during and immediately after
using it, since the hob becomes very hot.
Z X
Do not allow children to touch an unused
device. Make any potentially hazardous
parts safe.

Proper installation and placement

The appliance must be installed and connected
to the electricity and gas supply in accordance
with the separate installation instructions.
Have a qualified fitter/ electrician carry out the
necessary work.
The appliance is designed for use in the home
for preparing food. No liability is assumed
for any damage caused by improper use or
incorrect handling.
If the appliance is to be permanently
connected to the power supply:
Z X
Ensure that the device is installed only
by the customer service, an electrician
or trained personnel with the appropriate
knowledge/education.
Z X
This appliance is not connected to a
combustion products evacuation device.
It shall be installed and connected in
accordance with current installation
regulations. Particular attention shall be
given to the relevant requirements regarding
ventilation.
Z X
Ensure that the device is installed in a way
that allows to disconnect it from the power
supply, with a contact opening distance that
ensures complete disconnection in category
III overvoltage conditions.
Z X
Ensure that the appliance is connected to
an earthing system in compliance with the
current regulations.
Z X
Ensure that the device is connected directly
to the mains socket.
– Ensure that no adapters, no multi-
sockets and no extension cables are
used to connect the device.
Z X
Ensure that the supply cord is not damaged.
If damaged, contact customer services.
Z X
Ensure that the device is not exposed to
atmospheric agents (rain, sun).
Z X
Ensure that the ventilation of the appliance
is in accordance with the manufacturer's
instructions.
Z X
CAUTION! The use of a gas cooking
appliance results in the production of heat,
moisture and products of combustion in the
room in which it is installed.
Z X
Ensure that the kitchen is well ventilated
especially when the appliance is in use:
keep natural ventilation holes open or install
a mechanical ventilation device (mechanical
extractor hood).
Z X
Ensure the gas type and supply is
compatible with appliance specifications.
– The type of gas for which the appliance is
arranged is specified on the dataplate on
the bottom of the tray.
– 5 –
EN