Safety Switch Off - Franke FHBP 604 4I PW T XS Manual De Instrucciones

Safety switch off

Timer
Activating extra powerful setting
• First select the hotplate by touching its relevant sensor (A), and immediately
after press the sensor (D) then press (E). Extra powerful setting is on, and
power indicator displays symbol "P".
Premature turning extra powerful setting off
Touch the desired hotplate sensor, and immediately after press the sensor »-«
(D). Letter "P" disappears and the hotplate automatically switches to level 9.
Maximum continuous operation of a particular hotplate is limited, and the
duration is displayed in the above chart. When the hotplate is switched off by
the safety mechanism, the indicator displays symbols "0", or "H" in case there is
any remaining heat left.
In such cases switch the hotplate off by touching the relevant power setting
sensor (D).
Power setting
Hours lapse prior safety
switch off
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do
not change the above setting, the safety mechanism will switch the hotplate off
after 4 hour.
Protection from overheating
Induction hotplate is also fitted with safety device against overheating which
protects electronic parts from damages. This device operates on several levels.
When temperature of the hotplate excessively rises, it switches on two-stage
fan. If this is not enough, extra powerful heating is deactivated, and finally the
safety device either reduces the heating power of certain hotplates or turns
them off completely. When the hotplate cools off, the full power of hotplate is
again available.
Timer facilitates the cooking procedure by setting the period of hotplate
operation, and it can also be used as alarm timer.
Activating the timer
• Touch the hotplate ON/OFF sensor (A) of the relevant hotplate.
• By touching the »+« or »-« (E or D) sensor select the power setting from 1 to
9.
• Touch the timer ON/OFF sensors (D+E) to activate timer. Timer display
indicates »00«.
• By touching sensors »+« or »-« (E or D) set the desired cooking time (from
01 to 99 minutes). After a few seconds timer starts operating. Timer
controlled hotplate control lamp is on and is blinking.
You can use timer to set exact cooking time for each hotplate at the same
time. To speed up the timer setting keep the relevant sensors »+« or »-«
(E or D) constantly pressed.
Altering preset cooking time
• You can change preset cooking time whenever you wish during the hotplate
operation.
• Touch the hotplate ON/OFF sensor (A) to select the desired hotplate.
Decimal dot is on.
• Touch the timer ON/OFF sensors (E+D) to activate the timer.
• By touching sensors »+« or »-« (E or D) set the new desired cooking time.
1 2 3 4 5
8 6 5 5 4
6 7 8 9
1.5 1.5 1.5 1.5
28