Package Contents; Hardware Installation - Grandstream GWN7605LR Guía De Instalación Rápida

OVERVIEW
EN
This long range Wi-Fi access point is designed to provide extended cov-
erage support and is ideal for outdoor Wi-Fi solutions thanks to its wa-
terproof casing and heat resistant technology. The GWN7605LR comes
equipped with dual-band 2x2:2 MU-MIMO technology and a sophisti-
cated antenna design for maximum network throughput and extended
Wi-Fi coverage range of up to 250 meters. To ensure easy installation
and management, the GWN7605LR uses a controller-less distributed
network management design in which the controller is embedded within
the product's web user interface. The GWN7605LR is also supported by
GWN.Cloud and GWN Manager, Grandstream's cloud and on-premise
Wi-Fi management platforms. It is the ideal Wi-Fi AP for voice-over-Wi-
Fi deployments and offers a seamless connection with Grandstream's
Wi-Fi-capable IP phones. With support for advanced QoS, low-latency
real-time applications, mesh networks, captive portals, 100+ concurrent
clients per AP and dual Gigabit network ports with PoE/PoE+, GWN-
7605LR is ideal for deployment of medium/low wireless network environ-
ments with medium to advanced user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -30° to
70° for operating and -30° to 80° for storage.
• Do not expose the GWN7605LR to environments outside of the fol-
lowing humidity range: 5-95% RH (non-condensing).
• Do not power cycle your GWN7605LR access point during system
boot up or firmware upgrade. You may corrupt firmware images and
cause the unit to malfunction.

PACKAGE CONTENTS

GWN7605LR
Access point 2x Antennas
1x Base
1x Quick Installation
Bracket
Guide
4x Screws
2x Metal
4x Expansion
(PM 3.0 x 7)
Straps
Screws
~1~
GWN7605LR PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7605LR
GWN7605LR can be powered on using PoE/PoE+ switch using follow-
ing steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN-
7605LR.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7605LR can be mounted on the wall or on a metal bar, Please
refer to the following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch