Package Contents; Hardware Installation - Grandstream GWN7605 Guía De Instalación Rápida

OVERVIEW
EN
The GWN7605 is an affordable 802.11ac Wave-2 Wi-Fi access point ide-
al for small to medium wireless network deployments with medium user
density. It offers dual-band 2x2:2 MU-MIMO with beam-forming technol-
ogy and a sophisticated antenna design for maximum network through-
put and expanded Wi-Fi coverage range. To ensure easy installation and
management, the GWN7605 uses a controller-less distributed network
management design in which the controller is embedded within the prod-
uct's web user interface. The GWN7605 is also supported by GWN.Cloud
and GWN Manager, Grandstream's cloud and on-premise Wi-Fi manage-
ment platforms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments
and offers a seamless connection with Grandstream's Wi-Fi-capable IP
phones. With support for advanced QoS, low-latency real-time applica-
tions, mesh networks, captive portals, 100+ concurrent clients per AP
and dual Gigabit network ports with PoE/PoE+, the GWN7605 is scalable
Wi-Fi solution for deployments such as retail locations, restaurants, small
offices and more.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 40 °C for
operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7605 to environments outside of the following humid-
ity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7605 during system boot up or firmware up-
grade. You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

1x GWN7605
Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
3x Screw
3x Plastic
(PA 3.5 x 20)
Expansion Bolt
~1~
3x M3 NUT
1 x Quick Installation Guide
GWN7605 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7605
GWN7605 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7605.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7605 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch