Package Contents; Hardware Installation - Grandstream GWN7625 Manual Del Usuario

OVERVIEW
EN
The GWN7625 is a high-performance 802.11ac Wave-2 Wi-Fi access
point. It offers 2.4G 2×2:2, 5G 4×4:4 MU-MIMO technology and a sophis-
ticated antenna design for maximum network throughput and expanded
Wi-Fi coverage range. The GWN7625 uses a controller-less distributed
network management design in which the controller is embedded within
the product's web user interface. It is also supported by GWN.Cloud and
GWN Manager, Grandstream's free cloud and on-premise Wi-Fi man-
agement platform. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deploy-
ments and offers a seamless connection with Grandstream's Wi-Fi ca-
pable IP phones. With support for advanced QoS, low-latency real-time
applications, Mesh, captive portals, 200+ concurrent clients per AP and
dual Gigabit network ports with PoE/PoE+, the GWN7625 is an ideal Wi-
Fi access point for medium wireless network deployments with medium-
to-high user density.
PRECAUTIONS
Do not attempt to open, disassemble, or modify the device.
•
Do not expose this device to temperatures outside range of 0 °C to
•
40 °C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7625 to environments outside of the follow-
ing humidity range: 10-90% RH (non-condensing).
Do not power cycle your GWN7625 during system boot up or firm-
•
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.

PACKAGE CONTENTS

1x GWN7625
Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
3x Screw 3x Plastic Expansion
(PA 3.5 x 20)
Bolt
~1~
1 x Quick Installation Guide
3x M3 NUT
GWN7625 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
Ethernet RJ45 port (10/100/1000Mbps) to your rout-
NET
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7625
GWN7625 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7625.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7625 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch