Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
PRECAUTIONS
•
Before connecting the unit ensure that the power supply is 230 V, 50/60 Hz. earthed power outlet.
•
Discard any brush or grinding wheel with cracks, knocks or flaws. Breakage of these components during
operations could cause serious accidents.
•
Before starting work ensure that the brush-holder/wheel holder is firmly coupled to the motor shaft.
•
When handling workpieces use safety goggles, gautles and mask.
•
Do not allow children or unskilled personnel to handle the unit.
•
Never polish, brush or grind materials which might give off particles which are toxic if inhaled.
•
Before starting to polish or grind a workpiece, ensure that the motor shaft spin direction is correct (red
arrow on motor stator). Attack angle depends on spin direction.
•
Do not use the unit near solvents, alcohol or other inflammable materials. Take extreme care when grinding
materials which may give off sparks.
•
Before using the unit ensure that it is set up on a firm solid base.
•
Do not use the unit without the exhauster on unless the nature and characteristics of a specific job require
that it be disconnected. In this case keep working time as short as possible.
TECHNICAL CHARACTERISTICS
Height:
Width:
Depth:
Weight:
Power supply:
Speed (rpm):
Noise level:
Exhauster flow rate:
10
500 mm
800 mm
500 mm
60 kg
230 V, 50/60 Hz
1500/3000, 50 Hz
1800/3600, 60 Hz
67 dB
3
500 m
/hora
Tabla de contenido
