Tabla de contenido
Los detalles se refieren a Fanvil Auto Provision en
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3816f8d5f0.pdf
Parameters
Basic settings
CPE Serial Number
Authentication Name
Authentication Password
Configuration File
Encryption Key
General Configuration File
Encryption Key
Download Fail Check
Times
Update Contact Interval
Save Auto Provision
Information
Download Common
Config enabled
Enable Server Digest
DHCP Option
Option Value
Custom Option Value
Enable DHCP Option 120
SIP Plug and Play (PnP)
Enable SIP PnP
Server Address
122
Table 19 - Auto Provision
Description
Display the device SN
The user name of provision server
The password of provision server
If the device configuration file is encrypted , user should add
the encryption key here
If the common configuration file is encrypted, user should add
the encryption key here
If there download is failed, phone will retry with the configured
times.
Phone will update the phonebook with the configured interval
time. If it is 0, the feature is disabled.
Save the HTTP/HTTPS/FTP user name and password. If the
provision URL is kept, the information will be kept.
Whether phone will download the common configuration file.
When the feature is enable, if the configuration of server is
changed, phone will download and update.
Confiugre DHCP option, DHCP option supports DHCP
custom option | DHCP option 66 | DHCP option 43, 3
methods to get the provision URL. The default is Option 66.
Custom Option value is allowed from 128 to 254. The option
value must be same as server define.
Use Option120 to get the SIP server address from DHCP
server.
Whether enable PnP or not. If PnP is enable, phone will send
a SIP SUBSCRIBE message with broadcast method. Any
server can support the feature will respond and send a Notify
with URL to phone. Phone could get the configuration file with
the URL.
Broadcast address. As default, it is 224.0.0.0.
Tabla de contenido
