Martor SECUNORM 590 Manual Del Usuario página 41

Attaching the bracket using
cable ties
1
You should also push the cable
tie through the two external
holes in the base of the wall
mount bracket. This is also easier
if you fold the rubber tab away
beforehand.
HANGING UP THE SECUNORM 590
B. 7 After attaching the wall mount
bracket you can clamp the
SECUNORM 590 in place with
a little push ...
The information on cable ties is to be understood merely as a suggestion as this type
of at tachment depends significantly on the individual conditions at your premises.
2
It is best to attach further cable
ties to stabilise the wall mount
bracket between the rubber tab
and the base.
... and remove it with a little
pull.
You need:
3
Then pull the cable ties together
on a suitable rod, thereby at-
taching the wall mount bracket.
GB
41 41