End Of The Handle - Martor SECUNORM 590 Manual Del Usuario

END OF THE HANDLE

MAINTENANCE AND ASSEMBLY
If necessary, you can rotate the end of the handle by 180 degrees. Or replace the handle if it is broken.
1
It is best to place the SECUNORM 590 on a flat surface as shown
above to do this.
2
First undo all three screws.
! The screws are secured which
makes it more difficult to be
unscrewed completely.
36 36
3
Now remove first the lower ( a )
and then the upper half of the
handle ( b ) from the metal tube.
Rotating the handle
4
a
b
Put the halves of the handle back
together in the opposite position
on the metal tube. Ideally first
below ...