Wall Mount Bracket - Martor SECUNORM 590 Manual Del Usuario

WALL MOUNT BRACKET

MAINTENANCE AND ASSEMBLY
ATTACHMENT
The wall mount bracket is the
ideal place to hang your SECU-
NORM 590 in a manner which is
safe for the workplace.
One wall mount bracket is suffi-
cient to hang the knife vertically;
to hang it horizontally it is better
to use two wall mount brackets.
Depending on the local condi-
tions, you can attach the wall
mount bracket to a suitable wall
using the enclosed screws and
dowels or attach it to a rod using
a cable tie.
Attaching the bracket using screws
1
Each wall mount bracket is at-
tached using two screws. The
two outer holes in the base of
the wall mount bracket are pro-
vided for this.
If you are hanging the SECUNORM
590 vertically, place the holes
side by side; if you are hanging it
horizontally place the holes one
above the other.
40 40
Choose between
hanging the
knife vertically ...
2
b
Before screwing in the screws, it
is best to push one of the two
plastic plugs in the wall mount
bracket out ( a ) and fold the rub-
ber tab to one side ( b ) .
... or horizontally.
3
b
a
a
Use a suitable screwdriver ( a ) .
Fold the rubber tab back ( b ) and
fix again with the plug.
AB