Medela Symphony Instrucciones De Uso página 32

13. Supplemental Information (cont.)
Low or No
Suction
Condensation
or milk in
tubing
No "let-down"
or breastmilk
expression
32
Yellow Valve Head and White Membrane Check
• Remove and separate yellow valve head from white membrane.
• Inspect the yellow valve head for chips or cracks. Inspect the white
membrane for holes or tears. If flawed or damaged replace valve and/
or white membrane prior to pumping.
• Wash yellow valve head and white membrane per Cleaning
instructions in Section 4.
• Reassemble. Make sure the white membrane lays flat on the yellow
valve head, and if it does not, replace the yellow valve head and/or
white membrane prior to pumping.
Breastshield and Breastshield
Connector Check
• Inspect breastshield and breastshield connector to make sure there are
no cracks and they securely attach to each other.
Other Checks
Inspect the following to check for damage and secure connections.
• Tubing adapter to breastshield connector.
• Inspect Symphony membranes. If membranes appear to be worn or
have a tear they need to be replaced (Article # 67091).
• Test vacuum. If suction is not improved, contact Medela Customer
Service at 1-800-435-8316.
• Refer to "Tubing cleaning" Section 6.
• Ensure your breastpump kit is assembled correctly and that there is
suction.
• Relax and take a 10-15 minute break if let down is not achieved after
2 consecutive pumping sessions.
• Consult with your healthcare provider or breastfeeding specialist if
expression does not occur.