Makita XCU03 Manual De Instrucciones página 52

Installing the protector
WARNING:
Never use the tool without the
guard illustrated in place.
CAUTION:
Take care not to injure yourself on
the cutter for cutting the nylon cord.
Attach the protector to the clamp using bolts.
2
1. Clamp 2. Protector 3. Cutter
Installing the cutting tool
CAUTION:
Always use the supplied
wrench(es) to remove or to install the cutting tool.
CAUTION:
Be sure to remove the hex wrench
inserted into the tool head after installing the cutting tool.
NOTE:
NOTE:
replace the cutting tool easily.
NOTICE:
Be sure to use genuine Makita nylon
cutting head.
6
5
2
3
1. Nylon cutting head 2. Receive washer 3.
4. 5.
1.
wrench is fully inserted.
1
3
1
4
6. Loosen
2. Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3.
procedures in reverse.
OPERATION
Attaching the shoulder harness
CAUTION:
Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION:
Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
1. Wear the shoulder harness on your left shoulder.
2. Clasp the hook on the shoulder strap to tool's
hanger.
1
1. Hook 2. Hanger
12 ENGLISH
2