Makita XCU03 Manual De Instrucciones página 50

Speed adjusting
power button. Each time you tap the main power button,
the level of speed will change.
2
1. 2. Main power button
Speed indicator
Automatic Torque Drive Technology
speed and torque for the condition of grass being cut.
1. 2. Reverse button
1
Mode Rotation speed
High 6,500 /min
Medium 5,300 /min
Low 3,500 /min
1
2
Indicator
Reverse button for debris removal
WARNING:
the battery cartridge before you remove entan-
gled weeds or debris which the reverse rotation
function can not remove.
remove the battery cartridge may result in serious
rotation. It is only for removing weeds and debris entan-
gled in the tool.
lamp starts blinking, and the cutting tool rotates in
reverse direction when you pull the switch trigger.
until the cutting tool stops.
1. Reverse button 2. Power lamp
NOTE: During the reverse rotation, the tool operates
only for a short period of time and then automatically
stops.
NOTE: Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE: If you tap the reverse button while the cutting
tool is still rotating, the tool comes to stop and to be
ready for reverse rotation.
Electric brake
ting tool. If the tool consistently fails to quickly stop the
cutting tool after the switch trigger is released, have the
tool serviced at our service center.
CAUTION:
This brake system is not a substi-
tute for the protector. Never use the tool without
the protector. An unguarded cutting tool may result
10 ENGLISH
Mode Rotation speed
3,500 - 6,500 /min
Switch off the tool and remove
2
1
-