Zp100 Rear Panel Connectors - Sonos ZonePlayer ZP100 Guía De Configuración

12

ZP100 Rear Panel Connectors

Ethernet
switch
connectors
Subwoofer output
Ethernet switch connectors (4)
Right speaker terminals
Left speaker terminals
Voltage select
AC power (mains) input
Analog audio out (fixed/variable) You may use a standard RCA audio cable to connect the
Right speaker
terminals
Analog audio outputs
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Use high-quality speaker wire to connect the right
speaker to the ZonePlayer.
Use high-quality speaker wire to connect the left speaker
to the ZonePlayer.
115V/230V
Select the appropriate voltage setting for your country.
Use the supplied power cord to connect to power outlet.
audio inputs on a separate audio component such as an
amplifier or your home theater receiver, to the
ZonePlayer's analog audio outputs.
Sonos ZonePlayer ZP100 Setup Guide
Left speaker
terminals
AC power (Mains)
Analog audio inputs
Voltage select
115V/230V
input