Demolition And Disposal - Palazzetti ELSA Instalación Y Mantenimiento

9 DEMOLITION AND DISPOSAL

Demolition and disposal of the wood insert is the sole responsibility of the owner.
Dismantling and disposal may be entrusted to a third party provided we are talking about a company authorised
to salvage and eliminate said materials.
In all cases you must abide by the laws in force in the country of installation as regards the
disposal of materials and, if necessary, the report of disposal.
All dismantling operations for demolition must take place when the wood insert is still.
Contact the local authorised waste disposal company to scrap the wood insert structure
Dumping the product in accessible areas is a serious hazard for both people and animals.
The owner is always responsible for injury to people and animals.
When the wood insert is demolished, the EC mark, this manual and all the other
documents relative to it must be destroyed.
The picture of the bin crossed is labelled on the equipment, and it means that when the device
is out of use it has to be kept separated by other wastes.
In this case both the fan kit:
On the basis of Article 13 by Legislative Decree n°151 of 25th July 2005 actuation of the
European Directive 2002/96/CE of 23rd February 2003 on waste electrical and electronic
equipment. It is connected to the policy and action which aim to the prevention of waste
electrical and electronic equipment,named RAEE, and in addition, the reuse, recycling and
other forms of recovery of such wastes so as to reduce the disposal of waste. It also seeks to
improve the environmental performance of all operators involved in the life cycle of electrical
and electronic equipment.