Rbmp1 Control Board - Description - CAME PS BARCODE Serie Manual De Instalación Y Manteniemiento

PS BARCODE -

RBMP1 control board - description

1
2
13
3
4
5
6*
1 - 315mA line fuse
2 - 630mA circuit protection fuse
3 - Not used
4 - Not used
5 - Terminal for connecting battery and battery charger (BN1
optional)
6 - Terminal for control board * power supply.
7 - Terminals for connecting devices to be controlled
(automations, alarms, traffi c lights, etc.)
* The cross-section of the double insulated power cable (230 V) depends on the specifications and dimensions of the
system, and must not be less than 2.5 mm². Before connecting the device, disconnect the mains power supply to the system.
Hardware and connections
3
7
8 - Terminal for the PC50 connection.
9 - Terminals for connecting PSE/PSU units.
10 - Terminals for connecting digital input devices.
11 - "active circuit " and "communication in progress" LED
signal lights
12 - Modem connection (or to PSI16, if used)
13 - 5 position Dip Switch (for functions, see page 45)
9
12
11
10
9
8