STACK-ON TD-40-SB-B-S Instrucciones página 6

BACK UP KEY
A "Back Up Key" has been provided in case the
ba eries run low. If you lose your key, you may
purchase a replacement key be referencing the serial
number located on the back of your safe or the front
lower right corner. See section regarding
replacement keys for further information.
1. Remove the cover by pressing the tab and turning
the cover as shown in the illustration.
hang by the connecting cable while unlocking the
safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering your new code,
remove the key and screw the cover back in place.
BACK UP KEY
CLOCKWISE
1/4 TURN
e lock can
TAB
GUN REST INSTALLATION
You will need to permanently secure the gun rests to
avoid shi ing when accessing your guns.
A ach the 4 brackets in desired location using 2
screws for each bracket as shown in gures 1 and 2
below. e gun rest should be level a er assembly.
NOTE: Each gun rest can be positioned at di erent
heights as desired.
1
2
6
20
40676-1605