SIARR
5313
PREPARATION
* Remove the two rear lights (except Golf V).
* Remove the bumper.
* Remove the absorber
ASSEMBLY
* On the outside of the spars, remove the paper frames
obstructing the attachment points (x).
* Insert the 2 towing arms in the spars and attach them,
without tightening, with nuts and bolts X.
* Assemble the towing body to points V and W
with the nuts and bolts V and W.
FINISHING
* Tighten to the torques specified as follows.
* Reassemble the bumper
FASTENING KIT
2 off HM10x35 screws
V
2 off CS10 washers
2 off HM10x35 screws
W
2 off CS10 washers
2 off HM10 nuts
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
4 off HM10x30 screws
X
4 off CS10 washers
4 off 10,5x35 flat washers
2 off HM12x60 screws
Y
2 off CS12 washers
2 off HM12 nuts
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
NB :
Connecting a universal wiring kit ref.8526 is absolutely impossible on the vehicle (may
cause damage).
It is essential to use either a dedicated wiring kit or a relay box ref.8530.
Type
Type
SI0011
Approval No.
Tow bar for
VW Golf5 / Golf+ e24*94/20*00*0034
and Audi A3 (RLD)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NDM5313-H - FOLIO NDMANG
321811600001
Max. Total
Max. Total
Authori. Weight Towable Weight
2 040 kg
1 650 kg
Max. Verti-
Value
cal load
D
75 kg
8,95 kN