Technical Specifications - Festo CPX-FB38 Manual De Instrucciones

4

Technical specifications

Type
General technical data
Protection class due to housing
following EN 60529, completely
installed, plug connector inserted or
provided with protective cap
Protection against electric shock
Protection against direct and indirect
contact as per IEC/DIN EN 60204−1
Bus node own current reception
from operating voltage supply for
electronics/sensors (V
Electrical isolation
EtherCAT interfaces for V
Module code (CPX−specific)
Remote I/O
Remote controller
Network−specific characteristics
Fieldbus protocol
Baud rate
Cross−over recognition
EtherCAT input/output size
26
)
EL/SEN
EL/SEN
CPX−FB38
see CPX system manual
P.BE−CPX−SYS−...
IP65/IP67
by means of a PELV circuit
max. 80 mA at 24 V
(internal electronics)
electrically isolated
220
169
EtherCAT, depending on the
Ethernet protocol IEEE 802.3;
optimised for process data;
real time possible
100 Mbit/s
Auto MDI
64 bytes / 64 bytes
Independent of operation mode
Festo CPX−FB38 0804NH English