OPERATING THE COFFEE BREWER
Brewing coffee
Press the BREW button. The Coffee
1
Brewer will heat all the water needed
to brew at the beginning of the cycle.
You will see the Heating indicator light
up during this segment of the cycle.
This process takes approximately
6 minutes for 8 cups of coffee.
NOTE: If you wish to cancel the Brew cycle
at any time, press the BREW button.
When the cycle is complete, the Enjoy
3
indicator will light up and 3 beeps will
sound. The Warming plate will then
keep the coffee at optimum temperature
for 1 hour after brewing. However, for
best results, it is recommended that
coffee is consumed within 30 minutes
after brewing. To cancel the Warm cycle
at any time, press the BREW button.
HELPFUL TIP: It is recommended
to allow the brewing cycle to complete
for the selected number of cups prior
to tasting to extract the maximum flavor
from the pour over brewing method.
10
After all the water is heated, the Coffee
2
Brewer begins to alternately shower the
grounds with water, allowing the coffee
to steep. This happens in stages until the
cycle is over; you will see the Pouring
and Steeping indicators alternately light
up during this segment of the cycle.