Idiomas disponibles
Idiomas disponibles
User Guide for Dynamic
Mini Cordless whisk FTP94
Rechargeable
Battery Pack
Wall mount
support
Main switch
Motor housing
Whisk
page 8
DESCRIPTION :
• Operating Voltage : 9,6 V
• Speed : 700 RPM
• Whisk length : 185 mm (7
1/2 Inch)
RECHARGEABLE
BATTERY PACK :
• Operating Voltage : 9,6 V
• Autonomy : 40 / 50 minutes
• Nickel Cadium Battery
CHARGER :
• Operating Voltage :
120 Volts (230 Volts)
• Output Voltage : 12 Volts
• Full recharge time : 2 hours
Battery Charger
Mini Cordless whisk FTP94
SECURITY :
Warning :
• Start unit when whisks are fully immersed.
• Shut off unit, before removing from liquid.
• Shut off and unplug the unit before cleaning.
• When cleaning, protect motor housing from any liquid inflitration through
the ventilation slots.
OPERATING THE MIXER :
• In order to maintain battery life, drain battery completely before recharging.
A- Recharging battery :
• Connect AC cord to wall outlet. A green led will light up, indicating good
AC connection.
• Insert the battery into the charger slot. Red led will light up, charging pro-
cess is in effect.
• It takes 2 hours to recharge completely.
B- Recharging process details :
1- Rapid charge :Red led open (continuous).
2- Slow charge :Red led blinking.
3- When red led is off, process is finished.
• When inserting an empty battery, charging process must start.
Probable cause not to do so would be that the internal battery
temperarure is to high.
• Leave the battery in the charger, the process
will automaticaly start when the internal
temperature reaches 0 °C to 50 °C.The Charger
is equiped with electronic sensors in order to
avoid possible internal damages to the battery
pack.
User Guide for Dynamic
page 9
