Aqua Medic Qube 30 Manual De Instrucciones página 5

Qube 30
1. Please take the Qube 30 out of the box.
2. Make sure the power cord is not damaged. Do not touch the plug with wet hands.
3. Do not disassemble the light. Must only be repaired by specialists.
4. The Qube 30 can only be installed indoors. Do not expose it to rain, damp or dripping water.
5. When you turn on the light, please don't look directly at the light.
6. In case of power failure, please contact a specialist.
7. The Qube 30 should not be installed near heat sources or magnetic fields. Don't place anything
on the light.
8. The Qube 30 is only designed for aquaristic use.
1. Technical data
Dimensions
Packaging size
Net weight
Gross weight
Input voltage
Output voltage
Power consumption
2. Installation
Attach the Qube 30 to the aquarium pane by using the holder. Don't twist the holder otherwise the
cable within the gooseneck could be damaged.
Attention: Please keep the light buttons clean and dry; also make sure your hands are dry before
touching the light, or the touch keys could fail.
On/Off Button
Touch the On/Off button to turn on the light. After touching the On/Off button again, the Qube 30
switches off. Wenn you turn the light on, it should illuminate at once. If not, please touch (W) or
(B) button to ensure that the blue and white lights are on.
Blue and White Buttons
Please touch the (W) or (B) button to turn the blue or white light on. The brightness changes by
touching the buttons repeatedly. The brightness cycles are: 1-2-3-4-5-0.
5
80 x 80 x 25 mm (l x w x h)
425 x 160 x 40 mm (l x w x h)
0.3 kg
0.75 kg
100 – 240 V AC
24 V DC
30 watts