Rockwell Automation Allen-Bradley RAC6182 Instrucciones De Instalación página 13

The terminal block is equipped with two retainer screws to prevent accidental
interruption of power to the RAC6182 Computer. Tighten the screws on the AC
version to a torque of 5 inch–pounds (0.56 N•m). Tighten the screws on the DC
version to a torque of 2.5 inch–pounds (0.28 N•m).
WARNING: EXPLOSION HAZARD! Do not connect or
disconnect equipment unless power has been switched off or
the area is known to be non-hazardous.
The following terminal blocks can be ordered from Rockwell Automation:
Part Number
6189-2CONN
Publication 6182-IN001D-MU-P
RAC6182 Industrial Computer
120/240VAC Unit terminal block (qty 1)
24VDC Unit terminal block (qty 1)
Relay output terminal block (qty 1)
Description
13