Installation (continued)
5
Installing the stopper and ball
rod
NOTE: In shallow cabinet installations, the ball rod (U) may
need to be shortened. Use a hack saw to cut the end of the
rod, away from the ball, to the desired length .
□
Insert the pop up stopper (P) into the drain hole
in the sink.
□
Remove the spring clip (T) from the ball rod (U).
□
Remove the ball nut (W). Insert the ball rod (U)
into the drain body (O) and through the hole of
the pop up stopper (P). See insert 1.
□
For easier removal and cleaning, rotate the pop
up stopper (P) 90 degrees so that the ball rod
(U) does not go through the hole in the pop up
stopper (P). See insert 2.
□
Secure the ball nut (W) and bushing (V), against
the hole in the drain body (O) and tighten the
ball nut (W) onto the threaded end. Do not
overtighten.
O
Insert 2
O
P
1
Insert 1
U
W
V
T
6
Installing the lift rod
□
Insert the lift rod (Q) through the faucet (A)
and down into the lift rod strap (S). Tighten
the thumb screw (R).
A
6
Q
Q
R
S
R