Electromagnetic Fields (Emf) - Philips ACM067/01 Manual De Instrucciones

This symbol means that this product contains a built-in rechargeable
battery which shall not be disposed of with normal household waste
(2006/66/EC). Please take your product to an official collection
point or a Philips service center to have a professional remove the
rechargeable battery.Follow your country's rules for the separate
collection of electrical and electronic products and rechargeable
batteries. Correct disposal helps prevent negative consequences for
the environment and human health.The fan module disassembly
procedure for recycling center as below:
1 Use an ultrasonic cutter to carefully cut along the gap in the middle of the
battery module. The cutting depth of the ultrasonic cutter is recommended to
not exceed 2 mm.
2 After cutting, pull out the fan cable to the vertical direction of the PCB. And Use
one tweezers to carefully pry off the PCB, and be careful not to pry the lithium
battery.
3 Use an electric soldering iron to remove the battery cable from the PCB, and
wrap the positive and negative poles of the battery cable with insulating tape to
prevent short circuiting of the positive and negative poles.
4 Use a hot air blower to heat the PCB, pay attention to the heating temperature not
too high, and ensure that the battery surface temperature does not exceed 60 °C.
5 After heating, use a plastic sheet to carefully pry the battery off. Do not use
excessive force to prevent the battery from deforming.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
CE-marking
The mask conforms to the electro-magnetic directive (2014/30/EU) and RoHS
(2011/65/EU) due to the presence of an electronic circuitry and is therefore
marked with the CE-marking.
8 English