Setting The Dynamic Soundstage Organizer; (Dso) - Sony CDX-MP70 Manual De Instrucciones

Sound
• EQ7 Tune (page 23) — to adjust the equalizer
curve.
• HPF (High pass filter) (page 24)
• LPF (Low pass filter) (page 25)
• Loud (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
• AUX Level (page 26) — to adjust the volume
level of connected auxiliary equipment.
1
Press (MENU).
To set A.Scrl, press (MENU) during CD/MD
playback.
2
Rotate the ./> control dial until
the desired item appears.
3
Press the –m or M+ button to
select the desired setting (Example:
"on" or "off").
4
Press the ./> control dial.
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
(DISC +) or (DISC -) on the card remote commander
for 2 seconds.
22
./> control
dial
Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.
VOL control dial
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press the VOL control dial repeatedly
until "DSO" appears.
3
Rotate the VOL control dial to select
"DSO on" or "DSO off."
Turn the VOL control dial clockwise for "on,"
and counterclockwise for "off."
To cancel the DSO function, select "DSO
off."
After 3 seconds, the display returns to the
normal playback mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to off.