Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
► 1 . Dust cap
To remove the drill bit, pull the chuck cover down all the
way and pull the drill bit out.
2
► 1 . Bit 2. Chuck cover
To remove the dust cup set, hold the root of dust cup
and pull it out.
► 1 . Dust cup
NOTE: If the cap comes off from the dust cup, attach
it with its printed side facing up so that groove on the
cap fits in the inside periphery of the attachment.
Hook (optional accessory)
CAUTION:
hanging the tool with the hook.
CAUTION:
or on potentially unstable surface.
1
1
2
3
► 1 . Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
1
To remove, loosen the screw and then take it out.
OPERATION
CAUTION:
handle) and firmly hold the tool by both side grip
and switch handle during operations.
CAUTION:
piece is secured before operation.
9 ENGLISH
Always remove the battery when
Never hook the tool at high location
Always use the side grip (auxiliary
Always make sure that the work-
1
2
3
Tabla de contenido
