Cleaning And Care - Blumfeldt Rising Sun Zenith Manual Del Usuario

Insert the batteries of your remote control
• Open the battery compartment at the rear of
the remote control. Insert 2 AAA batteries make
sure to match the (+) and (-) ends of the battery
with the (+) and (-) ends indicated in the battery
compartment.
• Only use the battery type indicated in this
manual.
• Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause
personal injury or damage to property.

CLEANING AND CARE

Cleaning
• Unplug your power cable for your safety before cleaning your appliance.
• Take out the front grid wire through the inlets on the frame using a slotted
screwdriver.
• Make sure that the power is off for your safety. Power cable plug must be
unplugged.
• The reflector and filament must be cleaned with a soft cloth, a smooth
brush or cool or dry air. The cloth may be damp but never too wet and the
cleaner should not include any chemical.
• Refrain from using cleaning material likely to damage the reflector
(cleanser etc.).
• Insert the wire grid using a slotted screwdriver.
EN
21