Idiomas disponibles
Idiomas disponibles
Operation examples
Operation and control functions with active call connection
Door call sounds, accept door call
Activate/deactivate half-duplex communication mode
(one speaks, the other listens) with existing door connection
Trigger the door release function with an existing door connection
End call / end connection
Operation and control functions without active call connection
The DCA... must always be dialled to carry out control functions.
In the following examples, the DCA... is operated on an extension
connection with the internal extension 21.
Light switching (without PIN)
or
Light switching (with PIN)
Note: If a PIN was defined, the PIN must be entered after selecting the
DCA... and before each function call. Star key, 4-digit PIN, star key
Activate doormatic (this function must be entered twice (2 x "# 991")
for security reasons).
Deactivate Doormatic
Switching relay 1
Switching relay 2
Function reset (Centrally deactivate doormatic, concierge and chain call 1–3)
[x]: 0 = off, 1 = on
Operating steps/inputs
and press a
number key (0–9)
Press number key 9
# 61
or # 0
and 21 # 50
or
and 21 * [PIN] * #50
and 21 # 991 # 991
and 21 # 990
and 21 # 21 [x]
and 21 # 22 [x]
and 21 # 910
