15. Install the Side Fixed Panels
NOTE: Perform the procedures below from the inside of the shower.
To prevent marring the surface of the shower base, slide the side fixed panel into the wall jamb,
then slide it downward until it rests on the shower base.
Repeat this procedure with the remaining side fixed panel.
Insert three #8-18 x 1/2" screws through the slots in the wall jamb and fasten to the corresponding
holes in the fixed panel. Do not tighten completely.
1100676-2-F
Side
Fixed
Panel
Wall
Jamb
18
Screw
Wall
Jamb
#8-18 x 1/2"
Slot
Screw
Sterling