Kohler STERLING 2375 Serie Guia De Instalacion página 22

20. Complete the Door and Panel Installation
Complete the Door Installation
Open the door until the setscrew holes in the hinge assemblies are exposed.
Thread a #8-32 x 1/8" setscrew into each hinge assembly with the provided hex wrench, but do not
tighten until instructed to do so.
Check the door for proper operation.
If adjustments are required, loosen the hinge screw.
Tilt or shift the door panel as needed.
Tighten the hinge screw.
Open the door. From inside of the shower, tighten the hinge setscrews to the pivot pin in both the
top and bottom hinges.
Side Fixed Panel Adjustments
To adjust the side fixed panels, loosen the three screws securing the side fixed panel to the wall
jambs.
Tilt or shift the side fixed panels as needed.
Tighten the wall jamb screws.
1100676-2-F
Screw
Screw
Screw
22
Setscrew
Hex
Wrench
Screw
Hinge Plate
Sterling