Syslink Connect; Structure And Function; Commissioning The Connect - Festo Tec2Screen Manual De Instrucciones

8 SysLink Connect

8.1 Structure and function

The SysLink Connect provides 8 digital inputs and outputs. The SysLink Connect enables direct control of
MPS stations or the activation of Tec2Screen
®
electrical connection is established via a 24-pin system connector.
A 24 V and 0 V supply voltage is provided via the SysLink Connect.
Note
The SysLink Connect requires 2 Tec2Screen

8.2 Commissioning the Connect

Proceed as follows:
1. Insert the Connect into the base.
Please note: Both locking clips must be depressed when doing this.
2. The Connect is detected automatically by the base.
3. If the iEasyLab software has been started, the Connect will be detected and shown on the display.
44
The port assignment of the Connect that
has been inserted into the base will be
displayed on the iPad after starting the
iEasyLab software.
simulations with programmable logic controllers. The
®
slots.
®
© Festo Didactic 8034153