Viewing A Channel In Full-Screen Mode; Playing Recorded Video Clips; Push Video Configuration; Configuring The Wan Port - Velleman AVTECH NVR2 Guía Rápida

10.2 Viewing a Channel in Full-Screen Mode

To view a channel in full screen mode, you can:
 Click directly on the channel image to see that channel in full screen mode. Double-click the image to
restore the previous overview.
 In the quick operation panel [18], click
want to display in full screen mode. Click

10.3 Playing Recorded Video Clips

1. Make sure that manual and/or event recording is enabled: in the main menu [19], click
CONFIG) and select RECORD to check or adjust the settings.
2. In the playback panel [20], press the play button
3. The fast forward
repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4. Press the pause button
5. Press the stop button
11.

Push Video configuration

11.1 Configuring the WAN port

1. Make sure the NVR is properly connected to the router with a RJ45 network cable.
2. From your NVR, select (ADVANCED CONFIG), and select "Network" "WAN".
V. 01 – 04/03/2013
. On the control panel that appears, select the channel you
and fast rewind buttons increase/decrease the playback speed. Press the button
to pause playback.
to stop playback and return to live monitoring.
NVR2
to restore the previous overview.
. The recorded files are shown.
9
(ADVANCED
©Velleman nv