Setting The Relay Switching Time (Only On-Wall/In-Wall Version); Initialising The Date And Time - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

6.12 Setting the relay switching time (only on-wall/in-wall version)

The setting applies to both relays. If the relays need to be set separately, see
Section 7.3.
Master finger RT

6.13 Initialising the date and time

The fingerprint scanner can save the last accesses. The audit set
(B-55606-00-3-0) can be used to read out the list of last accesses
(see Chapter 8).
In order to assign a time stamp to each access, the time needs to be set once.
Switching
time
[1...60 s]
„ „ Drag a master finger across the sensor, the red
and green LEDs light up briefly.
„ „ E » RT » YYYY » OK » MM » OK »
DD » OK » HH » OK » MM »OK
„ „ Example: 2017-07-23, 12:45am
E » RT » 2017 » OK » 07 » OK »
23 » OK »12 » OK » 45 »OK
NOTE
OK
After a power failure, the
date and time must be set
again.
77