Output Functions For Radio Module I/O - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

Installation and operating instructions
B-55600-20-1-8 | B-55600-20-4-8 | B-55600-23-1-8 | B-55600-23-4-8
Fingerprint scanner and code keypad

4.6.1 Output functions for radio module I/O

Relay "R2" enables the emission of one of three different electrical signals. It
is configured by setting a jumper (see following table). The status is always
indicated visually by LED "L2" at the front of the radio module I/O.
Relay "R1" of the radio module I/O is used to display an authorised access,
when an access control module is connected via the RS-485. Further con-
figuration of this connection is not possible. The status is indicated visually
via LED "L7".
Output 1
Output 2
Output 2
Output 2
EN
62
FMIO with radio-
controlled electrically
coupled cylinder/lock
- J1
Coupling active
(radio-controlled electri-
- J2 cally coupled cylinder/
lock is engaged)
Battery status
- J3
FMIO with radio-controlled
electrically coupled cylinder/
lock and fingerprint scanner/
- Authorised access
-
07.2017 | XX | Designed in Germany
code keypad
Unauthorised
access attempt
-
Battery status