Remotely Control The Alarm - DELTA DORE TTRTC TYXAL+ Manual De Utilización

2. Operation with an alarm system

2.3 Remotely control the alarm

Activate or deactivate (total or by zone) the system remotely.
You can activate or deactivate by using the menus suggested by the voice synthesis system
of the transmitter.
Call the transmitter
- The line pick up is immediate for the GSM transmitter.
- Use one of the following 2 methods for the PSTN transmitter.
Method 1,
from another telephone line (mobile or landline)
Ring Ring... Ring
Dial the call number of the
installation.
Method 2 to
be used in the following situations:
- when you call a mobile phone (if it hangs up before the 10th ring),
- when the transmitter cohabits with a telephone answering machine
or a message service.
Ring Ring... Ring
Dial the call number of
the installation.
Wait for 2 rings
To prevent the transmitter from accidentally picking up the line during 2 successive calls, you can deactivate
method 2 by entering the following sequence from the main menu: #82 6 1.
Enter #82 6 0 to reactivate it.
To select
French, press 1...
Wait for
10 rings
The transmitter picks up the line after
about 10 rings by default (number of
rings can be changed).
Hang up
Wait for
10 seconds
32
To select French,
press 1...
Dial the call number of the installa-
tion again.
The transmitter picks up
after 1 or 2 rings